Enabling Auto Lap Timing; Enabling Auto Pause; Specifying The Screen To Be Displayed During Running - Casio 3481 Operation Manual

Enabling Auto Lap Timing

While Auto Lap Timing is enabled, each time
you run the distance you specified with G-
SHOCK MOVE the lap time will be recorded
automatically.
Specifying the Distance for Auto Lap
l
Timing
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Press (C).
This displays the Training Mode screen.
3.
Hold down (A) for at least two seconds.
This displays the Training Mode setting
screen.
Pointer
4.
Use (A) and (D) to move the pointer to
[AUTO LAP].
5.
Press (C).
6.
Use (A) and (D) to move the pointer to
[ON] (enabled) or [OFF] (disabled).
7.
Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Training
Mode setting screen will re-appear.
8.
Press (E) to exit the setting screen.
Note
You can also use G-SHOCK MOVE to
●
enable or disable Auto Lap Timing.
Operation Guide 3481

Enabling Auto Pause

While Auto Pause is enabled, timing will pause
whenever you stop running.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Press (C).
This displays the Training Mode screen.
3.
Hold down (A) for at least two seconds.
This displays the Training Mode setting
screen.
Pointer
4.
Use (A) and (D) to move the pointer to
[AUTO PAUSE].
5.
Press (C).
6.
Use (A) and (D) to move the pointer to
[ON] (enabled) or [OFF] (disabled).
7.
Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Training
Mode setting screen will re-appear.
8.
Press (E) to exit the setting screen.
Note
You can also use G-SHOCK MOVE to
●
enable or disable Auto Pause.
Specifying the Screen to be
Displayed During Running
(RUN FACE)
You can customize the items on the three
screens can be displayed during run timing
(Training Mode).
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Press (C).
This displays the Training Mode screen.
3.
Hold down (A) for at least two seconds.
This displays the Training Mode setting
screen.
Pointer
4.
Use (A) and (D) to move the pointer to
[RUN FACE].
5.
Press (C).
6.
Use (A) and (D) to select the customize
screen (RUN FACE).
7.
Press (C).
8.
Use (A) and (D) to select the display area
whose contents you want to change.
9.
Press (C).
15