Advertisement
Observer 110
(14) Surface-mounted cable entry
(15) Condensation hole
(16) Central fastening dome
(17) Terminals
o
Slacken manual knob (5).
o
Incline sensor head and slacken central screw (6).
Cable entry from below.
o
When the connecting cable is laid on the surface, open cable entry (14) in the connection
box.
o
Unless installing in dusty areas, break out the condensation hole (15) in the connection
box.
o
Fasten connection box using suitable screws.
Connecting the controller
(3) Sensor head
(17) Terminals
(18) Installation button, NC contact
o
Connect sensor head and optional installation button according to connection diagram .
Terminal assignments for the sensor head
black, BK
brown, BN
blue, BU
Fastening sensor head on connection box
o
Set sensor head (3) on connection box (1). When doing so, do not damage any cables.
o
Fix sensor head (3) by tightening central screw (6).
82508412
8: Connection diagram
Switched external conductor
Neutral conductor
19.05.2011
External conductor
7/10
Advertisement
