Weider WESY29510 User Manual page 16

34. Slide the Speed Bag (31) onto the Speed Bag
Hook (32).
35. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in
ADJUSTMENTS, beginning on the following page.
Before using the weight system, pull each cable a few times to be sure that the cables move smoothly over
the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the
cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE
DIAGRAM on page 21 for proper cable routing. If there is any slack in the cables, you will need to
remove it by tightening the cables; see TROUBLE-SHOOTING AND MAINTENANCE on page 20.
34
16
32
31