NEC Express5800 SIGMABLABE User Manual page 74

(English)
ISCLI
Switch> enable
Switch# configure terminal
Switch(config)# no system dhcp
Switch(config)# interface ip 256
Switch(config-ip-if)# ip address 205.21.17.3 255.255.255.0
Switch(config-ip-if)# enable
Switch(config-ip-if)# exit
Switch(config)# ip gateway 4 address 205.21.17.1
Switch(config)# ip gateway 4 enable
Switch(config)# copy running-config startup-config
IMPORTANT:
・
・
64
When assigning an IP address and default gateway for the
management interface manually, assign them to interface 256 and
Gateway 4, respectively.
When enabled dhcp of the Switch Module, the IP address obtained
from the DHCP server overrides the static IP address. When
assigning the IP address manually, disable the dhcp.
(Enter Privileged EXEC mode)
(Enter Global Configuration mode)
(Disable dhcp)
(Enter Interface IP Configuration mode)
(Assign IP address for the Interface)
(Enable IP interface 256)
(Exit to Global Configuration mode)
(Assign default gateway 4)
(Enable default gateway 4)
(Save the configuration)