NEC Express5800 SIGMABLABE User Manual page 75

User access levels
The Switch Module provides three levels for user access. The default user names/passwords for each access level
is listed in the following table.
User account
user The user can view all the Switch Module status information and statistics,
but cannot make any configuration changes to the Switch Module. The
user account is enabled by default.
oper The operator manages all functions of the Switch Module, but these
changes will be lost when the Switch Module is rebooted/reset. By
default, the operator is disabled and has no password.
admin The administrator has complete access to all menus, information, and
configuration commands on the Switch Module. The admin account is
enabled by default.
NOTE: It is recommended that you change the passwords after initial
configuration.
Description
(English)
Password
(Default)
user
-
admin
65