NEC Express5800 SIGMABLABE User Manual page 64

(English)
■ N8406-052F
The following table lists the ports.
Category
Internal interface
CPU Blade
Switch Module
Management network
External interface
Uplink
(SFP+ module slot)
Uplink
(QSFP+ module slot)
NOTE: By default, VLAN 1 is the default VLAN, and all ports except Port
37 are assigned to it.
54
Port number Speed
1-32 1/10Gbps
33-36 10Gbps
37 10/100Mbps The port dedicated to management network. Port
38-45 10Gbps
46-53 40Gbps
Description
The ports dedicated to the CPU Blade. Two each
ports connect with each CPU Blade installed the
Blade Slot in the Blade Enclosure.
The ports dedicated to communications between
two Switch Modules that are inserted in adjacent
Switch Module slots. By default, port 33-36 are
disabled.
37 is isolated from the other ports by using
VLAN. Use port 37 for managing the Switch
Module. To connect the management interface,
connect the port in the Blade Enclosure. For
more information, see the Blade Enclosure
User's Guide.
Uplink ports using optional
N8406-024F 1000BASE-SX SFP Module,
N8406-037F 10GBASE-SR SFP+ Module,
N8406-039F 1000BASE-T SFP Module, or
K410-203(03) 3m 10G SFP+ Copper Cable.
Uplink ports using optional
N8406-053F 40GBASE-SR QSFP+ Module,
K410-235(03) 3m 40G QSFP+ Copper Cable, or
K410-236(03) 3m 40G QSFP+ - 4x10G SFP+
Copper Cable.