Table of Contents
Advertisement
User interface and navigation
Display description
Figure 4 Display overview
1 Calibration icon
2 Lock icon
3 Sensor? icon
4 Parameter
Icon
Description
Shows the battery power level. Flashes when the battery power is less than 10%.
Shows when the lock feature is on. When the lock feature is on, the parameter value on the display does not
change. Push
Sensor? Refer to
Troubleshooting
Shows when the tester is in calibration mode or when a calibration is due. If "?" shows next to the calibration icon,
the last calibration was not successful. When the ACAL setting is set to Yes (default), "?" shows next to the
calibration icon when a calibration is due.
Keypad description
2
Shows after auto calibration
3
Shows during auto calibration
4
Shows during custom calibration.
6
Figure 4
shows the measurements, calibration standard information and indicator icons
shown on the display.
Table 1
5 Battery icon
6 Parameter value
7 Calibration standard(s) measured for
last calibration (low, medium, high)
8 Calibration standard(s) expected
Table 1 Display icons
to set the lock feature to on or off.
on page 10.
Figure 5
and
Figure 6
show the Pocket Pro and Pocket Pro+ keypads.
key descriptions.
gives descriptions of the icons.
9 Temperature
10 Custom standard (C1, C2)
2
3
4
Table 2
gives the
Hide quick links:
Advertisement
Table of Contents
