Nortel Meridian 1 Installation Manual page 22

Page 22 of 74 Acceptance tests
553-3001-211 Standard 17.00 April 2000
After you enter the CNFC command, any two telephones (one may
already be the maintenance telephone) dialing the special service
prefix code (SPRE) and the digits 93 will enter the manual conference
call. The prime directory number (PDN) indicator, if equipped, will light
on each telephone.
Going on-hook takes the telephone out of the manual conference call,
and the test must be restarted.
See LD 38 in the X11 Administration (553-3001-311) for more detailed
information on using this command.
6 Test various channels and conference groups audibly with the
command
CNFC STEP
When stepping through channels and groups, a clicking followed by
silence is normal. Any distortion or other noises indicates a faulty card.
Once the CNFC STEP command has been entered, entering C on the
system terminal or maintenance telephone steps through the
conference channels. Entering G steps through the conference
groups. There are 15 channels per group and 15 groups per
conference card.
Entering an asterisk (*) and END stops the test.
Again, see "LD 38" in the X11 Administration (553-3001-311) for
detailed information on using this command.
7 End the session in LD 38:
****