Inspection, Maintenance & Storage - Total Gym Core Trainer Blast Owner's Manual

Inspection, Maintenance & Storage
INSPECT YOUR UNIT PRIOR TO EACH USE
Before using your Total Gym
®
session, be sure to make the following inspection:
• Make sure the equipment is fully opened and sitting on a solid,
level surface with plenty of clearance on all sides. Unit should
be used on a mat or on carpeted surfaces only.
• Make sure the glideboard is gliding smoothly along the frame.
ROUTINE MAINTENANCE
• Wipe down your Total Gym
basis using a clean cloth and alcohol or alcohol-based products
like Windex or 409 . Do not leave towels or workout clothing
® ®
laying or hanging on the equipment.
• Periodically check the following parts for signs of fraying or
other wear: wheels, glideboard and frame. If the wheels,
glideboard and frame need replaced - do not use your unit,
wait until the part is replaced. If any other part than the ones
listed above needs to be replaced, do not use that part until it is
replaced.
• Never use a lubricant such as WD-40
or clean the unit. Use only 3-in-1
the axles of the wheel, not the roller surface.
Core Trainer Blast for your workout
Core Trainer Blast on a regular
®
or ArmorAll to lubricate
® ®
oil or machine oil to lubricate
®
TOTAL GYM CORE TRAINER BLAST |
®
STORAGE
1. To fold your Total Gym
remove the Safety Pins from the left and the right side of the
Front Floor Tube Assembly.
2. While holding the handlebar with grip with one hand, carefully
with the other hand begin to fold the Front Floor Tube Assembly
underneath the Main Frame Assembly.
WARNING
!
CRUSH HAZARD.
KEEP HANDS
CLEAR DURING
FOLDING.
3. Once Front Floor Tube Assembly is completely folded
underneath the Main Frame Assembly, insert Safety Pins
removed in Step 1 into the left and right side of the Front Floor
Tube Assembly to secure for storage. Use handlebar with grip
to roll your unit out of the way for storage in a safe location.
To order optional accessories, please go to TotalGymDirect.com 8
INSPECTION, MAINTENANCE & STORAGE
Core Trainer Blast for storage, first
®
Safety Pin
Safety Pin
fold underneath
Front Floor Tube Assembly
Handlebar with Grip
Safety Pin