EverFocus MoniVue System ESN41 Quick Installation Manual page 7

2. Installation
2.1 Mounting
You can mount the video recorder on a Flat Surface or on a DIN Rail.
Mounting on Flat Surface
To mount the video recorder on a flat surface:
1. Drill four holes on the mounting surface according to the hole-position on the video
recorder.
2. Insert the four supplied Mounting Screw Anchors into the holes on the mounting surface.
3. Place the video recorder on the mounting surface against the anchoring surface so that the
holes line up. Screw the video recorder to the mounting surface using the supplied four
Mounting Screws.
Mounting on DIN Rail
1. Screw the supplied two DIN Rail Mounting Clips to two holes on the bottom of video
recorder with the supplied two DIN Rail Mounting Screws.
Note: Depends on the way you would like to mount the video recorder on the DIN Rail
(vertically or horizontally), you can choose two holes from one of the sides (Up, Down,
Left, Right) for screwing the DIN Rail Mounting Clips.
MoniVue System – Video Recorder
DIN Rail Mounting Clip
DIN Rail Mounting Screw
6