Table Of Contents; Regulatory Information; Technical Data - Jøtul C 24 IT Installation And Operating Instructions Manual

ENGLISH

Table of contents

1.0 Regulatory information .............................. 2
2.0 Technical data .......................................... 2
3.0 Safety ........................................................ 6
4.0 Installation ................................................ 6
5.0 Daily use ................................................. 14
6.0 Servicing ................................................. 15
7.0 Maintenance ............................................ 16
8.0 Optional Equipment ................................ 16
9.0 Recycling ................................................. 17
10.0 Warranty .................................................. 17
On all our products there is a label
Product:
Jøtul
indicating the serial number and
Room heater fired by solid fuel
year. Write this number in the
Standard :
Minimum distance to adjacent combustible materials:
place indicated in the installation
Minimum distance to adjacent combustible materials:
Emission of CO in combustion products
:
Flue gas temperature :
instructions.
Nominal heat output
:
Efficiency :
Operation range
:
Fuel type :
Operational type :
The appliance can be used in a shared flue.
Always quote this serial number when
Country Classification Certificate/ Approved by
contacting your retailer or Jøtul.
standard
Norway Klasse II
SP Sveriges Provnings- och
Sweden SP
OGC
Forskningsinstitut AB
SP Swedish National
Testing and Research
EN
EUR Intermittent
Institute
Follow user`s instructions. Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlenen Brennstoffen.
Respectez les consignes d'utilisation. Utilisez uniquement
les combustibles recommandés.
Lot no: Y-xxxx, Year: 200x
Manufacturer: 221546
Jøtul AS
POB 1441
N-1602 Fredrikstad
Norway
2
Lot no. Pin.

1.0 Regulatory information

Installation of a fi replace must be according to local codes and
regulations in each country.
All local regulations, including those that refer to national and
European standards, shall be complied with when installing
the product.
The installation can only be taken into use after it has been
checked by a qualifi ed inspector.
An approval label made of heat resistant material is located
on the heat shield at the back of the product. This contains
information about identifi cation and documentation for the
product.

2.0 Technical data

Material:
Finish:
Type of fuel:
Max. log length:
Smoke outlet:
Flue pipe dimension:
Outside air connector:
Weight:
Optional extras:
mm.
Product dimensions, distances:
Technical data in accordance with 13229:
Nominal heat output:
Flue gas fl ow rate:
Recommended chimney draught:
Effi ciency:
CO emissions (13% O2):
OGC emissions (13% O2)
Dust emissions
Flue gas temperature:
Operation:
Intermittent operation means normal use of a fi replace. This
means that to refuel the fi re, you add more wood as soon as
the previous load of wood has burned down to embers.
Cast iron
Black paint
Wood
50 cm
Top
Ø 150 mm
Flexible aluminium pipe
Ø80 mm/Ø100 mm
Approx. 172 kg
Frame wide, Fan, Outside
air connection kit Ø 100
See Fig. 1
9.0 kW
6.5 g/s
12 Pa
85.3%@9.0 kW
0.06%
48 mg/Nm3
11 mg/Nm3
213°C
Intermittent