Jøtul C 24 IT Installation And Operating Instructions Manual page 9

Fig. 6
4. Remove the lock catch on the right-hand side of the product
and attach it to where the door hinges were on the left-hand
side.
Fig. 7
C
A
A
5. Remove the handle (Fig. 7B) from the door lock. Loosen
the 4 screws (Fig. 7A) holding the door lock and hinges in
place. Scrape any traces of glue off the surfaces (Fig. 7C).
o
180
B
Fig. 8
6. Rotate the parts of the door lock axis by 180°.
Fig. 9
A
7. Install the door lock and hinge on the opposite side (Fig. 9).
8. Place the door on the product. Note: the position of the door
can be adjusted slightly by loosening the screws (Fig. 5A)
a little. Tighten the screws.
9. Refi t the handle.
A
ENGLISH
180°
180°
180°
A
9