Table of Contents
Advertisement
Troubleshooting
Problem
Red and green LEDs
do not illuminate to
indicate the Battery is
charging correctly
Battery Pack has low
capacity
Tool does not start
when Trigger Switch
is depressed
Operation
Possible Cause
Battery not correctly
connected to Charger
Charger not powered
Battery not being fully
charged
Battery Pack has
been charged over
100 times and
Capacity has started
to reduce
Battery completely
discharged
Battery Defective
Tool defective
34
Solution
Clean Battery Socket
of Charger and
Battery Contacts and
fully slide on to
Charger so it clicks in
a locked Position
Recheck Mains
Connection
Do not remove
Battery until a full
Charge is indicated
This is normal for
battery packs.
Contact Westfalia
purchase a replace-
ment battery pack
Recharge battery or
replace with a fully
charged battery
Replace Battery
Contact the Westfalia
customer Service
Advertisement
Table of Contents
