Intended Use; Unpacking The Tool; Before Use; Setting Up The Battery Charger - Westfalia AMFW18 Instructions Manual

Intended Use

Battery-powered oscillating multi-function tool with quick accessory-
change mechanism, designed for cutting and abrasive tasks by fast
oscillation of a blade, file or sanding pad.

Unpacking the Tool

 Carefully unpack and inspect the cordless multi-function tool.
Familiarise yourself with all its features and functions.
 Ensure that all parts of the tool are present and in good condition. If
any parts are missing or damaged, have such parts replaced before
attempting to use this tool.

Before Use

Please note that the battery and charger are not included with the
tool.
Removing a Battery from the Tool
To remove the battery (6) from the tool, press the battery release
button (5), then slide the battery off the tool.
WARNING: Do not try to remove the battery without pressing the
battery release button. The multifunction tool or battery could be
damaged.
Fitting a Battery
To fit a charged battery, slide it on to the tool of the multifunction tool
until it clicks and locks into position.
Note: Make sure the battery and multifunction tool are lined up
correctly. If the battery does not slide into the tool easily, don't force it.
Instead, slide the battery out of the tool again, check the top of battery
and the multifunction tool battery slot are clean and undamaged and
that the contacts are not bent.

Setting up the Battery Charger

(Battery and Charger not included)
1. If fitted, remove any battery from the battery charger.
2. Insert the battery charger mains plug into a suitable mains socket.
Operation
27