MSA Ultima Controller Manual

Hide thumbs Also See for Ultima Controller:

Table of Contents

Download this manual

Ultima® Controller Guide

The controller provides complete access to all advanced features of the Ultima® X Gas Monitor through its full-

function keypad. The controller is used for basic calibration functions along with displaying minimum,

maximum and average gas values, displaying date of last calibration, setting span-gas values and alarm

values, setting the real time clock, and changing address. It is completely password-protected.

Because every life has a purpose...

Table of Contents

Need help?

Do you have a question about the Ultima Controller and is the answer not in the manual?

Page 1 Ultima® Controller Guide The controller provides complete access to all advanced features of the Ultima® X Gas Monitor through its full- function keypad. The controller is used for basic calibration functions along with displaying minimum, maximum and average gas values, displaying date of last calibration, setting span-gas values and alarm values, setting the real time clock, and changing address.
Page 2 Ultima Controller Guide Calibration & Instrument Selection Ultima Controller Summary Select Ultima or Ultima X • ON – Press ‘ENTER’ • Ready • OFF – Press ‘CLEAR’ for 5 seconds or unit turns off automatically • Display after 100 seconds •...
Page 3 Settings Setting Span Values Setting Alarm Values • Ready • Ready • Send • Send • Span • Alarm • Use +/- for gas list (i.e. 500 ppm CO) • 0 – set point • 1 – On/Off • Enter •...
Page 4 1-800-967-0398 care of these products. MSA Mexico Phone 01 800 672 7222 ID 0720-159-MC / January 2015 52 - 44 2227 3943 © MSA 2015 Printed in U.S.A. MSA International Phone 724-776-8626 Toll Free 1-800-672-7777 www.MSAsafety.com 724-741-1553 Email msa.international@msasafety.com...