Installation; Location; Free Space Requirements - Kenwood KIFF5014 Installation Instructions Manual

Built-in fridge freezer
Table of Contents

Advertisement

installation

installation

location

When selecting a position for your unit you should make sure the floor is flat and firm, and the
room is well ventilated with an average room temperature of between 16°C and 38°C. Avoid
locating your unit near a heat source, e.g. cooker, boiler or radiator. Also avoid direct sunlight
as it may increase the electrical consumption. Extreme cold ambient temperatures may also
cause the unit not to perform properly. This unit is not designed for use in a garage or outdoor
installation. Do not drape the unit with any covering.

free space requirements

When installing the unit, ensure that 25 mm of free space is left at both sides, 50 mm at the
rear of the unit and 25 mm at the top of the unit. The door can be opened to the right or the left,
depending on which best suits the location. Please ensure there is adequate space for the door
to fully open to 160°.
7

Advertisement

Table of Contents
loading

Table of Contents