Programming - Quality Espresso GAGGIA G6 + Operating Instructions Manual

7.

Programming

Advertising Screen 1
TOUCH-SENSITIVE AREA
Advertising Screen 2
7.1 – USER MENU
7.2 – TECHNICAL PERSONNEL MENU
First advertising screen
The image appearing on the main
screen may be replaced by
another image, in which case
follow the instructions found in the
programming section 7.2.5 - page
44. This screen will alternate with
the second advertising screen
every 10 seconds.
Click inside the area marked in red in
order to access the menu bar.
Second advertising screen
As with the previous one, this
image may be replaced by
another image, in which case
follow the instructions found in pro-
gramming section 7.2.5 - page 44
Stand-by icon
Clicking on this icon for 4
seconds, the machine enters and
exits Stand-by mode.
Screen for checking
temperatures and pressures
This screen indicates the
different temperatures and
pressures of the different
elements of the machine.
Work area lighting
By clicking on this icon,
the lighting of the work area is
activated or deactivated.
1
User Menu
In this Menu, 4 of the 5 options
are available for the user, the last
one is "Only authorized
personnel" and is solely for use
by technical service personnel.
2
Menu for Technical service
personnel
This menu contains 5 options
which are only available for
technical personnel. Access may
only be gained by using a code,
which by default is set as "1234".
We recommend that the
technician changes this code
upon installation, to do so refer to
programming section 7.2.6 on
page 45.
.
36
SYMBOLS IN THE MENUS
- STAND-BY
- BACK
- FORWARD
- UP
- DOWN
- SELECT VALUE
- CHANGE VALUE
- ACTIVATE LIGHTS
- CONFIRM
- INFORMATION
- 7.1.1 LANGUAGE
- 7.1.2 SOFTENER CHANGE
- 7.1.3 CLOCK
- 7.1.4 COUNTERS
- 7.2.1 ONLY AUTHORIZED PERSONNEL
- 7.2.2 MONITORAGE
- 7.2.3 PARAMETER
- 7.2.4 PERFORMANCE RECORD
- 7.2.5 MEMORY
- 7.2.6 CHANGE ACCESS PASSWORD
GB