Quality Espresso GAGGIA G6 + Operating Instructions Manual page 27

Electric
 Check that the voltage, frequency and power characteristics of
connection
 We consider that the machine has been installed correctly when
 The machine must be installed according to the country's current
 Do not use extension cables or multiple adaptors of any type to
•
Handling
•
•
•
•
Note: this device does not exceed 70 dB of acoustic pressure
the electrical installation coincide with those described on the
machine's characteristics plate. The characteristics plate can be
found below the drainage tray.
this has been performed by means of the appropriate omnipolar
magneto-thermal switch in line with the machine's power, along
with a differential which does not exceed the residual current of
30 mA.
electrical regulations. You must ensure the electric installation
has a reliable earthed connection, according to the
aforementioned standards. Quality Espresso declines all
responsibility for any possible damage caused by a faulty
installation or earth connection.
connect the machine to the power supply. The power supply
cable should never be wound up, it should be as straight as
possible in order to prevent it overheating.
Any internal handling of the machine must be performed by an
authorised technical service.
Preventive cleaning and maintenance must be performed in
accordance with the frequency indicated by the machine or the
technical service.
The manufacturer declines all responsibility for any possible
damage caused to the machine due to non-compliance with these
obligations, as well as those due to incorrect or inappropriate use
of the machine.
All of the machine's components, including the connection cable,
must be replaced with original spare parts. If the connection
cable is damaged, so as to avoid any possible danger, it must be
replaced by the manufacturer, its authorised technical service or
suitably qualified personnel.
Before performing any maintenance operation, ensure the
machine is disconnected from the electric power supply by using
the machine's general switch or disconnecting the power supply
cable.
26
GB