Before Using For The First Time; Flushing Out The Machine; Washing; Preparing The Wash Load - Miele WS 5071 Operating Instructions Manual

Before using for the first time

The first commissioning of the machine
should be carried out only by a Miele ser-
vice technician or an authorised Miele Ser-
vice Dealer.
It is essential that the machine is installed
and connected to power, water and drain-
age correctly.

Flushing out the machine

Any residual lubricants and water from testing
still in the machine should be flushed out as
follows:
Open the on-site stopcock.
Switch on the on-site mains switch.
Turn the key switch to position "B" (Oper-
ation).
Do not load any laundry in the machine.
Add a little detergent to compartment j .
Turn the programme selector switch to the
2 COTTONS 60°C programme.
Press the Start button X .

Washing

Preparing the wash load

Empty all pockets
Foreign objects, (eg nails, coins, paper
clips etc) can cause damage to textiles
and components in the machine.
Sort the laundry
Most garments have a textile care label in the
collar or side seam. Sort the laundry by care
label symbols.
Only wash items in this machine which are
stated by the manufacturer to be machine
washable on the textile care label.
Dark textiles often contain excess dye, and
should be washed separately several times
before being included in a mixed load.
Delicate textiles should be washed separately
in a delicates programme.
Loading the drum
Unfold laundry and load loosely in the drum.
For best results make up mixed loads of large
and small items. This improves the washing
effect and distributes the load better for spin-
ning.
Overloading reduces the wash result and
causes more creasing.
13 M.-Nr. 05616270