H3C S5120-HI Series Configuration Manual page 3

Preface
The H3C S5120-HI documentation set includes 10 configuration guides, which describe the software
features for the H3C S5120-HI Switch Series Release 5101, and guide you through the software
configuration procedures. These configuration guides also provide configuration examples to help you
apply software features to different network scenarios.
The Layer 3 – IP Routing Configuration Guide describes routing fundamentals and static routing
configuration.
This preface includes:
Audience
•
Conventions
•
• About the S5120-HI documentation set
Obtaining documentation
•
Technical support
•
Documentation feedback
•
Audience
This documentation is intended for:
Network planners
•
Field technical support and servicing engineers
•
• Network administrators working with the S5120-HI Switch Series
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention
Boldface
Italic
[ ]
{ x | y | ... }
[ x | y | ... ]
{ x | y | ... } *
[ x | y | ... ] *
Description
Bold text represents commands and keywords that you enter literally as shown.
Italic text represents arguments that you replace with actual values.
Square brackets enclose syntax choices (keywords or arguments) that are optional.
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
Square brackets enclose a set of optional syntax choices separated by vertical bars, from
which you select one or none.
Asterisk marked braces enclose a set of required syntax choices separated by vertical
bars, from which you select at least one.
Asterisk marked square brackets enclose optional syntax choices separated by vertical
bars, from which you select one choice, multiple choices, or none.