Check Point 12200 Installing And Removing Memory page 2

To prepare the appliance:
1. From the WebUI or the CLI, shut down the appliance.
2. Use the power switch to turn off power to the appliance.
3. Remove the power cords from the appliance.
4. Remove the warranty sticker from the appliance cover screw.
5. Remove the appliance cover screws.
Only use the screwdriver that is included in the upgrade kit to open and replace the
appliance cover.
6. Remove the top cover from the appliance.
Check Point 12200
Item Description
1 Appliance cover
2 Four appliance cover screws
2