Advertisement
Methven warrants this product against manufacturing defects and that it is suitable for use
under the operating conditions specified in this instruction sheet.
For your warranty please refer to www.methven.com or call Customer Service
New Zealand
0800 804 222
436751
Australia
UK
1300 638 483
0800 195 1602
WAIPORI 3 HOLE HOB MOUNTED BATH FAUCET
INSTALLATION GUIDE
TECHNICAL SPECIFICATIONS
Operating Pressure:
Min 35kPa, Max 1000kPa.
Recommended 35kPa - 500kPa.
Recommended installation of a pressure
limiting valve if supply exceeds 500kPa.
Operating Temperature:
Hot: Max 80°C.
Cold: Min 5°C.
NB: New Zealand Building Code Clause G12 -
Water Supplies specifies all outlets used
primarily for personal hygiene shall deliver
water at a safe temperature.
Inlet Connections:
All ½" BSP.
Issue A
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for METHVEN WAIPORI 3
Summary of Contents for METHVEN WAIPORI 3
- Page 1 Inlet Connections: All ½" BSP. Methven warrants this product against manufacturing defects and that it is suitable for use under the operating conditions specified in this instruction sheet. For your warranty please refer to www.methven.com or call Customer Service...
- Page 2 IMPORTANT Please read all of the instructions before installation Do not hydrostatic test the installation with this mixer installed. Damage to the ceramic headworks may occur. 2.0mm allen key All pipe-work must be thoroughly flushed prior to installation of the mixer. In-line filters (not supplied) must be installed on both hot and cold supplies to prevent foreign particles damaging the ceramic headworks.
Need help?
Do you have a question about the WAIPORI 3 and is the answer not in the manual?
Questions and answers