Canon TS9500 Series Online Manual page 327

Hide thumbs Also See for TS9500 Series:
Table of Contents

Advertisement

Print after creating print data by page
The print data is created in page units, and printing starts after the processing of one page of print
data is complete.
If a printed document contains unintended results such as streaks, selecting this check box may
improve the results.
Important
• Uncheck this check box under normal circumstances.
Prevention of Print Data Loss
You can reduce the size of the print data that was created with the application software and then print
the data.
Depending on the application software being used, the image data may be cut off or may not be
printed properly. In such cases, select On. If you will not be using this function, select Off.
Important
• When using this function, the print quality may drop depending on the print data.
Unit of Print Data Processing
Selects the processing unit of the print data to be sent to the printer.
Select Recommended under normal circumstances.
Important
• A large amount of memory may be used for certain settings.
Do not change the setting if your computer has a small amount of memory.
Print With
Specify the ink tank to be used from the installed ink tanks.
Select from All Colors (Default), All Except PGBK (Black), Only PGBK (Black).
Important
• When the following settings are specified, Only PGBK (Black) does not function because the
printer uses an ink tank other than PGBK (Black) to print documents.
• Other than Plain Paper, Envelope, Ink Jet Hagaki (A), Hagaki K (A), Hagaki (A), or
Hagaki is selected for Media Type on the Main tab
• Borderless is selected from the Page Layout list on the Page Setup tab
• Do not detach the ink tank that is not in use. Printing cannot be performed while either ink tank is
detached.
Stamp/Background dialog box
The Stamp/Background dialog box allows you to print a stamp and/or background over or behind the
document pages. In addition to the pre-registered ones, you can register and use your original stamp or
background.
Stamp
Stamp printing is a function that prints a stamp over a document.
Check this check box and select a title from the list to print a stamp.
327

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ts8320 seriesPixma ts8320

Table of Contents