Canon TS9500 Series Online Manual page 239

Important
• The network settings printout contains important information about your network. Handle it with care.
The following setting items are displayed. (Some setting items are not displayed depending on the printer
settings.)
Items
Connection
IPv4 address
IPv4 subnet mask
IPv4 default gateway
IPv6 link-local address
MAC address (Wired LAN)
Printer name
Bonjour service name
("XX" represents alphanumeric characters.)
If Settings is selected in the Wired LAN setting list screen, the following settings are available.
• Enable/disable Wired LAN
Enables/disables wired LAN.
• Advanced setup
For details on each setting item:
Advanced setup
Advanced setup
• Set printer name
Specifies the printer name. You can use up to 15 characters for the name.
Note
• You cannot use the same printer name as that already used for other LAN connected devices.
• You cannot use a hyphen for the initial or last character of the printer name.
• TCP/IP settings
Performs IPv4 or IPv6 setting.
• WSD setting
Setting items when you use WSD (one of the network protocols supported in Windows).
Enabled (connected)/Enabled (disconnected)/Disabled
XXX. XXX. XXX. XXX (12 characters)
XXX. XXX. XXX. XXX (12 characters)
XXX. XXX. XXX. XXX (12 characters)
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
XX:XX:XX:XX:XX:XX (12 characters)
XXXXXXXXXXXXXXX (up to 15 characters)
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)
239
Setting