Porsche 924 Workshop Manual page 55

10
Engine
I
Crankcase
28 . Detach front exhaust pipe at exhaust mani -
fold and connecting flange at primary muff-
ler .
29 • Detach guard .
30 . Disconnect universal joint at steering rack
(arrow). Remove cross member and discon -
nect stabilizer at frame on both sides.
10 - 6 Removing
I
Installing Engine
31. Attach chain US 1105 to lift points on engine.
Using universal floor crane, lift engine slightly
to tension chain.
32 . Disconnect electrical connectors, detach hose
and loosen clutch bell housing.bolts .
33 . Remove entire left hand engine mount (as
seen in driving direction) . Loosen lower
right hand engine mount .
34 . Lift engine out carefully by lifting and
turning at same time .
CAUTION
Lift engine carefully to avoid damaging
propeller shaft, clutch or body.
Printed in Germany