Advertisement
Installing the Cisco NCS 4216
SUMMARY STEPS
1. Unzip the file Cisco_usbconsole_driver_X_X.zip (where X is a revision number).
2. If using 32-bit Windows XP double-click the file setup.exe from the Windows_32 folder, or if using 64-bit
Windows XP double-click the file setup(x64).exe from the Windows_64 folder.
3. The Cisco Virtual Com InstallShield Wizard begins. Click Next.
4. The Ready to Install the Program window appears, Click Install.
5. The InstallShield Wizard Completed window appears. Click Finish.
6. Connect the USB cable to the PC and router USB console ports. The EN LED for the USB console port
turns green, and within a few moments the Found New Hardware Wizard appears. Following the instructions
to complete the installation of the driver.
7. The USB console is ready for use.
DETAILED STEPS
Step 1
Unzip the file Cisco_usbconsole_driver_X_X.zip (where X is a revision number).
Step 2
If using 32-bit Windows XP double-click the file setup.exe from the Windows_32 folder, or if using 64-bit Windows
XP double-click the file setup(x64).exe from the Windows_64 folder.
Step 3
The Cisco Virtual Com InstallShield Wizard begins. Click Next.
Step 4
The Ready to Install the Program window appears, Click Install.
Step 5
The InstallShield Wizard Completed window appears. Click Finish.
Step 6
Connect the USB cable to the PC and router USB console ports. The EN LED for the USB console port turns green, and
within a few moments the Found New Hardware Wizard appears. Following the instructions to complete the installation
of the driver.
Step 7
The USB console is ready for use.
Installing the Cisco Microsoft Windows 2000 USB Driver
This procedure shows how to install the Microsoft Windows 2000 USB driver.
SUMMARY STEPS
1. Obtain the file Cisco_usbconsole_driver.zip from the Cisco.com web site and unzip it.
2. Double-click the file setup.exe.
3. The Cisco Virtual Com InstallShield Wizard begins. Click Next.
4. The Ready to Install the Program window appears, Click Install.
5. The InstallShield Wizard Completed window appears. Click Finish.
6. Connect the USB cable to the PC and router USB console ports. The EN LED for the USB console port
turns green, and within a few moments a series of Found New Hardware Wizard windows appear. Following
the instructions to complete the installation of the driver.
7. The USB console is ready for use.
Connecting Console Cables
Cisco NCS 4216 Hardware Installation Guide
45
Advertisement
