Setting Of Coffee And Hot Water Portions; Switching Off The Machine - SAB S.V. ITALIA Sahara User Manual

Programming is done on standby machine ready to operate.
Programming begins pressing the key E on the touch pad on left side of the machine from operator side.
a. Press key E on the touch pad for more than 5 seconds
b. Release key E and press the key to be programmed (A B C D ). The led on the key lights on and
erogation begins.
c. When the wished quantity is reached press the lighted key and the erogation stops.
d. Repeat the sequence from a to c on every single key of the touch pad on left side of the machine
from operator side.
e. To exit from programming press key "E".
Note: By programming the touch pad on left side of the machine from operator side , the same quantities are
automatically set on the other touch pads.
If you want to program the other touch pad with different quantities, it is necessary to repeat the
programming sequence pressing the key E on the second touch pad.
For the perfect programming of coffee we suggest you to prepare a coffee using fresh and duly grinded
coffee to be put in the cup that will be used during regular operation.
Turn the general switch (fig.1.5) from position 2 to position 0.
Note:
If the espresso machine E96/Sahara
disconnected from electrical supply and water mains. The boiler must be
machines has to be carefully drained and stored in a dry location which is inaccessible to minors.
The machine must be dismantled by an authorized technician according local law and jurisdiction.
Manuale Utente – User manual - Gebrauchsanleitung Macchina caffè modello E96/Sahara
Con riserva di modifica - Specification subject to change – Änderung vorbehalten

Setting of coffee and hot water portions

is not used for a longer time, it has to be switched off,
ed 2009-01 – Pag 20 di 33

Switching off the machine

completely emptied. The