Setting Of Coffee And Hot Water Portions - SAB ELLIPSE 2GR User Manual

Programming is done on standby machine ready to operate and using the left touch pad
A B
a. Press key E on the touch pad till all the leds on all touch pads are flashing and the display shows
b. Release key E and press the key to be programmed (A B C D E ). The leds on the programming key
and on key E light on and erogation begins. The display shows what we are setting: for example for
key A the display will show
c. When the wished quantity is reached press the lighted key and the erogation stops. The related led
will light off and all the other leds begin flashing
d. Repeat the sequence from a to c on every single key of the touch pad left
Note: By programming the touch pad on left side of the machine from operator side , the same quantities are
automatically set on the other touch pads. If you want to program the other touch pad with different
quantities, it is necessary to repeat the programming sequence pressing the key E on the other touch pads.
For the perfect programming of coffee we suggest you to prepare a coffee using fresh and duly grinded
coffee to be put in the cup that will be used during regular operation.
e. To set the quantity of hot water, press the related key on the separate touch pad
The hot water led and key E led are flashing and the other are lighted off. Hot water erogation begins;
the display shows
f. As soon as the required quantity of hot water is reached, press again the hot water key to stop
erogation.
If none of the four keys is pressed within 30 seconds, the programmation phase stops automatically. In case
you want to stop it manually during any phase of the setting press key E.
Manuale Utente – User manual – Gebrauchsanleitung - Macchina caffè modello ELLIPSE
Con riserva di modifica - Specification subject to change – Änderung vorbehalten
C D E
ed 2011 – Pag. 24 di 41

Setting of coffee and hot water portions

Programming
Select within 30s
Programming
Espresso
Programming
Tea Water