SAB S.V. ITALIA Sahara User Manual page 14

Do not use aerosol sprays near the machine.
Do not place heavy objects or climb on top of the coffee machine.
Do not place on or near a hot gas or electric burner. Do not allow liquids to get inside the coffee machine.
Never touch coffee groups, boilers, metal pipes, spouts, steam and hot water valves and wands. They are
hot and could cause burns.
Attention: never hold your hands under the brewing group, the filter holder, the steam and hot water wands.
Hot drinks, hot steam and hot water are dispensed. Danger!
Allow the machine to cool before putting on or taking off parts
To protect against electric shock do not immerse any part of the machine, as well as cord and plugs in water
or other liquid.
To reduce the risk of electrical shock, do not touch the machine with wet parts of your body (i.e. your hands).
Before carrying out any maintenance operations turn the machine to "OFF", disconnect it from the mains and
allow to cool.
Do not operate any appliance with a damaged cord, plugs, or after the appliance malfunctions or has been
damaged in any manner. Do always contact the authorised technical service.
Before disconnecting the plug from the wall outlet, turn the machine off.
To ensure efficient and correct operation it is essential to follow the manufacturer's instructions concerning
the periodic maintenance carried out by the authorized service technician.
All maintenance must be carried out exclusively by authorized service technicians.
All spare parts must be original parts or parts authorized by the manufacturer.
The machine must be operated exclusively with clean fresh drinking water.
Never use the machine without water. This might cause serious damage to the machine and reflect also to
safety risks.
Whenever the machine is unattended from the operator, disconnect the power plug from the power outlet
and close the connection to the water mains.
Manuale Utente – User manual - Gebrauchsanleitung Macchina caffè modello E96/Sahara
ed 2009-01 – Pag 14 di 33
Con riserva di modifica - Specification subject to change – Änderung vorbehalten