Setting Of Coffee And Hot Water Portions; Preinfusion - SAB JOLLY Instruction Manual

Programming is done on standby machine ready to operate.
Programming begins pressing the key "
E
1. Press key " " on the touch pad for more than 5 seconds
E
2. Release key " " and press the key to be programmed (
dispensing begins.
3. When the wished quantity is reached (coffee or hot water) press the lighted key and the dispensing stops.
4. Repeat the sequence from a to c on every single key of the touch pad on left side of the machine from
operator side.
5. To exit from programming press key "
Note: By programming the touch pad on left side of the machine from operator side, the same quantities are
automatically set on the second touch pad as far as coffee is concerned. Hot water portions are to be set on every
group.
If you want to program the other touch pad with different quantities, it is necessary to repeat the programming
sequence pressing the key "
Preinfusion - ON
OFF
Turn " " the machine (main switch position "
A
Keep the " " button and in the meanwhile turn "
The machine confirm the operation with the led of the key pressed
Turn off the main switch (position 0)
Turn on the main switch (position 1)
From this moment the preinfusion function is automatically insert
Preinfusion - OFF
To remove the preinfusion option, – follow the previous steps but press the second button "
Manuale Utente – User manual – Macchina caffè modello JOLLY PRESTIGE
E
" on the touch pad on left side of the machine from operator side.
E
" or wait the automatic exit after several seconds
E
" on the Right touch pad.
A B
0
")
ON
" the machine (main switch position "
Rev. 2018-04 – Pag 27 di 37
Con riserva di modifica - Specification subject to change

Setting of coffee and hot water portions

A B C D F
). The led on the key lights on and
Pre infusion
1
")
B
" of the touch pad.