Removing The System Board; Prerequisites - Dell Inspiron 24 5000 Service Manual

Identifier
Status

Removing the system board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE: Your computer's Service Tag is stored in the system board. You must
enter the Service Tag in the BIOS setup program after you replace the
system board.
NOTE: Replacing the system board removes any changes you have made to
the BIOS using the BIOS setup program. You must make the appropriate
changes again after you replace the system board.
NOTE: Before disconnecting the cables from the system board, note the
location of the connectors so that you can reconnect the cables correctly
after you replace the system board.
Identifier
Status

Prerequisites

1 Remove the back
2 Remove the system-board
3 Remove the memory
4 Remove the solid-state
5 Remove the wireless
6 Remove the processor heat
7 Remove the processor.
98
GUID-B54497E8-5AD5-4FF9-AD4A-F32FDBEDE1E8
Released
computer. After working inside your computer, follow
After working inside your
GUID-B944BA0A-F1E5-46AE-8A89-82A3CD6B69CE
Released
cover.
shield.
modules.
drive.
card.
sink.
computer. For more safety best
www.dell.com/
Before