Removing The Side I/O-Board; Prerequisites; Procedure - Dell Inspiron 24 5000 Service Manual

Identifier
Status

Removing the side I/O-board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Prerequisites

1 Remove the back
2 Remove the stand.
3 Remove the inner
4 Remove the system-board
Identifier
Status

Procedure

Before conducting the following removal procedure, disconnect and remove from the
respective routing the following cables:
• Antenna cables from the wireless-card.
• Speaker cable (SPEAKER) from the system board.
• Camera cable (WEBCAM) from the system board.
1 Disconnect the side I/O-board cable (MB-SUSBC) from the side I/O-board.
GUID-7A647C13-3614-4248-8625-5BB2EBA6CAE1
Released
computer. After working inside your computer, follow
After working inside your
GUID-B921E997-CD1E-4A7D-96D6-723B6E2D1F99
Released
cover.
frame.
shield.
GUID-24C4BAED-5521-41AC-B66D-402B48A6789F
Released
computer. For more safety best
www.dell.com/
Before
59