Flash Memory Version Upgrade Procedure - Panasonic AK-HRP900P Service Manual

3-2. Flash Memory Version Upgrade Procedure

3-2-1. Preparation Items Required
• Personal Computer
• Flash Memory Version Up Tool (VFKB004)
• Flexible Cable (VWJ20E5500L0)
• Upgrade Data
3-2-2. Version Upgrade Procedure
1. Connect the Flash Memory Version Up Tool to the serial port of the personal computer.
2. Connect the flexible cable to the Flash Memory Version Up Tool and to the LOAD connector of the P.C. board
with which the software is to be programmed.
3. Change the LOAD SW of the P.C. board with which the software is to be programmed from "NORM" to
"LOAD."
4. Open the folder of the CPU writing software, and check that the four types of files of bin (*.bin), text (*.txt),
batch (*.bat) and application (flmemv.exe) are available within the folder same as the software to be
programmed (*.bin).
5. Turn the unit on, and double-click the bat file in the folder.
6. The writer starts to program the P.C. board with upgrade data. This programming process is completed when
the messages "ERASE", "WRITE" and "COMPLETE" are displayed on the Screen.
7. After the programming process is finished, turn the unit off, and disconnect the flexible cable from the
software writer and the P.C. board. Then return the LOAD SW from LOAD to NORM.
<Example of file>
These four files are reqauired for upgrade
data programming.
INF-5