Nortel Meridian 1 Manual page 44

Page 40 of 144 Telephones
553-3001-215 Standard 12.00 January 2002
Procedure 2
M2616CT Installation
DANGER OF ELECTRIC SHOCK
The M2616CT is not intended for direct connection to
the public switched network or other exposed plant
networks, because the exposed pins on the handset
cradle (where the handset sits) creates a possible
outlet for harmful voltage. The M2616CT is designed
to be used with a Meridian PBX.
1 Complete the wiring and cross-connections (loop power) before
connecting the telephone to the connection block.
2 Place the telephone upside down on a padded level work surface to
prevent damage to the telephone face.
3 connect the line cord into the bottom of the telephone base. Route the
cord through the channels.
4 Plug the AC adapter (Class 2 power supply) output DIN connector into
the bottom of the M2616CT set next to the line cord connection. Route
the cord through the channels.
5 Turn the telephone right side up and place it in the normal operating
position.
6 Insert the line cord TELEDAPT connector into the connecting block.
7 Plug the AC adapter (Class 2 power supply) input into the commercial
11V electrical main outlet.
8 Print the directory number on the designation card. Using a paper clip
remove the number lens from the telephone. Insert the designation
card and snap the lens back into place
9 Designate the feature keys.
WARNING