Nortel Meridian 1 Manual page 114

Page 110 of 144
Figure 37
Display cable routing
Set
553-3001-215 Standard 12.00 January 2002
Add-on modules
16 Tighten all screws, reconnect all cords, and place the telephone in the
normal operating position.
17 Perform the self-test (see Procedure 1 on page 32) and acceptance
test procedures. See LD 31 in the Software Input/Output Guide
Administration (553-3001-311).
Display
Board
Display
Module
excess
cable
P4 pin
connector
mounting
hole
J1
connector ribbon
cable (fold)
J2 pin
connector
553-2046