Exclusive App - Pioneer VREC-DZ700DC Owner's Manual

Exclusive App

The exclusive app "Dash Camera Interface" can be used to check the video recorded on this product
or make settings on the screen of an iPhone or smartphone (Android™).
To use this app, a Wi-Fi connection must be made between this product and iPhone/smartphone
(Android™) beforehand.
1 Set the Wi-Fi function of this product to on. →
2 Operate the iPhone or smartphone (Android™) to select this product as the Wi-Fi connection
device.
The SSID name (access point name) and password of this product can be checked in the Wi-Fi
settings screen.
• Only one iPhone/smartphone (Android™) device can be connected to this product at any one time.
When a second device is connected, the first device is disconnected.
• While a Wi-Fi connection is made, no operations can be performed on this product. If a function button
is pressed while a Wi-Fi connection is made, a message will be displayed prompting you to break the
Wi-Fi connection. If you select [Yes], the Wi-Fi connection will be disconnected, and operations on this
product will be enabled.
• You can change the SSID name of this product by operating the exclusive app "Dash Camera
Interface". Note, however, when the SD card is formatted, the SSID name returns to its default setting.
• It is recommended to enter the search term "Dash Camera Interface" in the search field to search for
the application.
"This Product Settings"
Dash Camera Interface
− 35 −