Pioneer VREC-DZ700DC Owner's Manual page 18

5 Route the power cable, 2nd camera connection cable and AV cable to the
passenger seat side.
6 Connect the power cable and AV cable.
→
"Connecting the Power Cable"
アクセサリー
ソケット
7 Turn the vehicle engine on to display the recording screen.
シガーライター
8 Adjust the angle of the lens so that video outside and inside the vehicle is
電源ケーブル
properly displayed.
During driving, turn the lens of this product towards the outside of the vehicle.
This product restarts when the lens angle is moved from the outside of the vehicle to the inside, and
vice versa.
To switch between camera video from this product and video from the 2nd camera, press the
button. →
"Function Buttons"
Note
A protective film is applied to the lens when the product is purchased. Peel off this film.
Turn the angle adjustment
jog dial to adjust the lens
angle.
− 18 −
This product
2nd camera
Turn this part to adjust the
lens angle.
Connection cable