Troubleshooting - Pioneer VREC-DZ700DC Owner's Manual

Troubleshooting

Check the following information before sending the product in for repairs.
Symptom
An error occurred during the
display and operation of this
product.
A file that should have been
saved cannot be found.
The product makes parking
mode files when you get in and
out of the vehicle.
There are many videos where
nothing happens in the files
recorded while parked.
My vehicle was hit while parked,
but a video file wasn't recorded.
An accident occurred during
driving, but a video file wasn't
recorded.
There's no sound when I play a
video file.
Cause
The microcomputer in this
product is malfunctioning.
If there is insufficient space in
the storage areas of the microSD
card, the files will be overwritten
in order from the oldest files.
The vibration when people get in
and out of the vehicle and the
movement of people are being
detected.
The sensitivity of impact
detection may not be
appropriate.
The sensitivity of impact
detection may not be
appropriate.
The sound recording setting may
be OFF.
− 38 −
Action
Press the reset button.
We recommend that you back
up any important files you
want to keep.
→
"Backing Up Recorded
Files"
Adjust the sensitivity of the
sensors to use for detection.
→
"This Product Settings" -
"Configurable Features" -
"Values" - "Parking mode" -
"G-Sensor Sensitivity"
Adjust the sensitivity of the
sensors to use for detection.
→
"This Product Settings" -
"Configurable Features" -
"Values" - "Video
Recording" - "G-Sensor
Sensitivity"
Check the sound recording
setting again.
→
"This Product Settings" -
"Configurable Features" -
"Values" - "System" - "Mic
Mute"