Using This Product; This Product Power; System Indicator Display; Function Buttons - Pioneer VREC-DZ700DC Owner's Manual

Using this product

Before using this product, first stop the vehicle in a safe location and apply the handbrake.

This product Power

This product starts when the vehicle's engine is turned on (ACC ON), and it automatically starts
recording. (Video recording) →
If the camera of this product is facing the inside of the vehicle when the vehicle engine is turned on
(ACC ON), a message is output and the alarm sounds.
Manually Turning the Power On and Off
This product can be manually turned on and off.
Hold down the
off confirmation screen is displayed. Press the
to turn the power off. Hold down the
and the power is turned on.
Guide to Charging Time
It takes approximately three hours to charge a flat battery.
Note
In high temperatures, the internal battery will stop charging for safety.

System Indicator Display

The operating status of this product is displayed with the system indicator.
System Indicator
Illuminated
green
Illuminated red
Blinking red

Function Buttons

The functions of the function buttons are indicated by the icons displayed at the bottom of the
screen.
The functions of the buttons will depend on the displayed screen. (Icons are not displayed on some
screens.)
In the playback screen or MENU screen, pressing the
previous screen.
"Using this product" - "Video Recording"
function button in the recording screen for at least three seconds. The power
Menu Displayed/
Video Recording
During Playback
―
―
―
/ function button to select [Yes], and press
function button again for at least three seconds,
Recording Event
○
―
―
function button returns you to the
− 24 −
Error Has Occurred
(Including microSD
Card not Inserted)
― ―
○ ―
― ○