Exclusive App - Pioneer VREC-170RS Owner's Manual

Exclusive App

The exclusive app "Dash Camera Connect" can be used on iPhone or Android™ smartphone to check
the video recorded on this product or make settings on the screen of iPhone or Android™ smartphone.
To use this app, a wireless connection must be made between this product and iPhone/Android™
smartphone beforehand.
1 Set the wireless connection function of this product to on.
2 Operate the iPhone or smartphone (Android™) to select this product as the wireless connection
device. The SSID name (access point name) and password of this product can be checked
in the wireless connection settings screen.
• Only one iPhone/smartphone (Android™) device can be connected to this product at any one time.
When a second device is connected, the first connected device is disconnected.
• While a wireless connection is made, no operations can be performed on this product. If a function
button is pressed while a wireless connection is made, a message will be displayed prompting you to
break the wireless connection. If you select [Yes], the wireless connection will be disconnected, and
operations on this product will be enabled.
• You can change the SSID name of this product by operating the exclusive app "Dash Camera
Connect". Note, however, when the SD card is formatted, the SSID name returns to its default
setting.
• It is recommended to enter the search term "Dash Camera Connect" in the search field to search for
the application.
→
" T h i s P r o d u c t S e t t i n g s "
− 32 −