Yamaha Disklavier MX100A Product Handbook page 95

[One key measure]
Item
Start-up
Ready
Select key
Open position measurement Pull the key shutter up and out of the sensor unit.
Write to RAM
Rest position measurement Lightly stroke near the key button, so that the key is
Write to RAM
End position measurement
Write to RAM
Store to flash memory
Operation
9F+11G+Power ON
Wait for 30-40sec. (stabilize the output of light-emit-
ting components)
Play the appropriate key
(Raise the key.)
With the keyboard raised.
Press the damper pedal once
not floating.
Press the damper pedal once
Play the appropriate key.
Press the damper pedal once
Press the soft pedal once
II-43
Response
Chord Once/sec.
Note that was played Once/sec.
Note Double continuous stroke
Note Triple continuous stroke
Chord Once/sec.
76C Triple or four continuous
stroke