Yamaha Disklavier MX100A Product Handbook page 70

2. Pedal Measurement
• On the MarkII and MarkIII, LOUD PEDAL and SOFT PEDAL are offered as separate items.
Enter maintenance mode: Hold down [
Press [R] three times.
Enter maintenance mode: Hold down [
Press [R] four times.
• PRO: LOUD/SHIFT
Enter maintenance mode: Hold down [
Press [+/YES] once.
] × 1
[
3. Half-Point Manual Adjustment
• Mark II, Mark III: Half-pedal adjustment starts automatically after the loud-pedal stroke is measured.
• PRO: Half-pedal adjustment starts automatically after the loud-pedal and shift-pedal strokes are mea-
sured.
4. MIDI 7F Manual Compensation
• On UP models only: At the initial pedal-measurement screen, press the [FUNC] button.
Step on the pedal with normal weight (not too strongly), hold it at stroke-end position, and press the
[REC] button.
* Selections available from the initial pedal-measurement screen.
[PLAY]
[REC]
[FUNC]
[VOLUME]
[TRANSPOSE]
[TEMPO]
[BALANCE]
] and [
PROGRAM No. 3
*Ms=PLAY
] and [
PROGRAM No. 4
] and [
Pedal stroke measure
PROGRAM No. 2
• Adjust the dial so that mute time is 1.5 sec.
• Press the REC button to store to memory. (If you don't press REC, the 10th data
value is stored to memory.)
• Existing half-point data is cleared immediately when pedal stroke measurement
is carried out.
LOUD MIDI 7Fh
XXX -> XXX (PED)
PEDAL MEASUREMENT-HALF POINT ADJUSTMENT
HALF POINT ADJUSTMENT
MIDI 7F COMPENSATION
DISPLAY DATA FOR EACH PEDAL RANGE
DISPLAY PASS NUMBER
DISPLAY ERROR MESSAGE
DISPLAY PK-CTL VERSION
II-18
] and switch on the power.
** LOUD PEDAL **
Tr=REC*
] and switch on the power.
** SOFT PEDAL **
*Measurement*
] and switch on the power.
(YES, , )