Weber 42373 Owner's Manual page 14

11. Lift and twist the burner assembly slightly, to sepa-
rate the Crossover ®
12. Remove the Crossover
(b)
(b)
(a)
13. Pull the selected burner(s) tube(s) from manifold
frame and replace with a new burner tube.
14. To reinstall the manifold assembly, reverse steps 7
through 13.
MAINTENANCE
tube (a) from the burners (b).
®
tube.
CAUTION: The burner openings (1) must be posi-
tioned properly over the
valve orifi ces (2).
(1)
Check proper assembly before fastening manifold in
place.
WARNING: After reinstalling the gas lines, they
should be leak checked with a soap and water solu-
tion before using the grill. (See, "Check for gas
leaks.")
14 14
(2)