Approvals; Model Lgd And Lpx Flash Pattern Compliances; Table 4 Model 8583446 Sp - Federal Signal Corporation Legend LGD Installation, Operation And Service Manual

Serial Interface Module

Table 4 Model 8583446 SP

Length
6.25 in
(15.9 cm)

Approvals

• SAE J845 Light Output (select flash patterns, Table 5 on page 14)
• CCR Title 13 (select flash patterns and LGD models, Table 5 on page 14)
• SAE 1113/41 RFI
• FCC Part 15
• NFPA (Table 6 on page 15)

Model LGD and LPX Flash Pattern Compliances

The patterns listed as "Yes" (Y) in Tables 5 and 6 comply with the flash
requirements and light output requirements of the lighting standard in the table
header. Patterns listed as "No" (N) do not comply with either the flash requirements
or the light output of the standard. You should use a non-compliant pattern only
after the people you are trying to warn have been trained to recognize the pattern
as a warning signal. End users are responsible for choosing the light patterns that
meet their jurisdiction's requirements.
Installation, Operation, and Service Manual
Federal Signal www.fedsig.com
Height Width
3.16 in 1.06 in
(8.0 cm) (2.7 cm)
Overview of the Legend Light Bar
Shipped with a 24-pin cable harness
(1751364) that is 3 feet long. The
harness connects to the module's J1
outlet.
13