Related Manuals for Federal Signal Corporation LEDTCL97
Summary of Contents for Federal Signal Corporation LEDTCL97
- Page 1 LED Traffic Clearing Light Model LEDTCL97 Installation and Service Instructions 25500469 A Rev. A0 0818 Printed in U.S.A.
- Page 2 A copy of this limited warranty can also be obtained by written request to Federal Signal Corporation, 2645 Federal Signal Drive, University Park, IL 60484, email to info@fedsig.com or call +1 708-534-3400.
-
Page 3: Table Of Contents
Table 1 Product Specifications ..........5 Table 2 Kit Contents List ............5 Table 3 Wire Functions ............6 Table 4 Flash Patterns .............8 List of Figures Figure 1 Exploded View of the Light ........9 Figure 2 Mounting Surface Dimensions.........10 LED Traffic Clearing Light Model LEDTCL97... -
Page 4: Safety Message To Installers
• File these instructions in a safe place and refer to them when maintaining and/or reinstalling the product. Failure to follow all safety precautions and instructions may resulting property damage, serious injury, or death. LED Traffic Clearing Light Model LEDTCL97... -
Page 5: Overview Of Ledtcl97
Installation and Maintenance Instructions Overview of LEDTCL97 The Federal Signal LEDTCL97 is a self-contained, high intensity, LED light designed for mounting to the exterior of a vehicle. The unit is supplied with eight selectable flash patterns. The unit can operate on a 12 Vdc power source. An optional trim ring (QL97MC) can be purchased separately. -
Page 6: Installing The Ledtcl97
Before proceeding with installation, determine approximate location of the light head and plan all wire routing. To install the LEDTCL97, proceed as follows: See Figure 1. Position one light head on the desired mounting surface. Ensure that the light head is level-side to-side. -
Page 7: Selecting A Flash Pattern
Advance to the next pattern as needed. Let the desired pattern run for at least 15 seconds to store it in memory. After desired pattern is stored, cut off exposed wire strands from green wire and securely tape wire end. LED Traffic Clearing Light Model LEDTCL97... -
Page 8: Safety Message To Operators
• At the start of your shift, you should ensure that the light is securely attached and operating properly. Failure to follow these safety precautions may result in property damage, serious injury, or death. LED Traffic Clearing Light Model LEDTCL97... -
Page 9: Figure 1 Exploded View Of The Light
Installation and Maintenance Instructions Figure 1 Exploded view of the light LED Traffic Clearing Light Model LEDTCL97... -
Page 10: Figure 2 Mounting Surface Dimensions
Installation and Maintenance Instructions Figure 2 Mounting Surface Dimensions 7.25 in 3.625 in 2.625 in 5.25 in 1.00 in Ă .25 in Ă TYP.(4) LED Traffic Clearing Light Model LEDTCL97... -
Page 11: Cleaning The Lights
Manufacturer’s Representative. Provided a brief explanation of the service requested or the nature of the malfunction. Address all communications to the following address. Federal Signal Corporation Service Department 2645 Federal Signal Drive University Park IL 60484-3167 LED Traffic Clearing Light Model LEDTCL97... -
Page 12: Replacement Parts
Replacement Parts Table 5 Replacement parts Description Part Number #6-32 x 2.0" Screw, S.S. 7000A404-32 Rivet nut, Rubber, #6-32 70900417 Clear smooth lens,QL97 801201444-02 *(Optional) QL97 trim ring QL97MC *QL97 trim ring purchased separately. LED Traffic Clearing Light Model LEDTCL97...