Configuring Mme (Windows) - Korg Soundlink DRS OASYS PCI Installation Manual

Installation and Setup
Configuring MME (Windows)
The OASYS PCI is designed for seamless use with all MME-compatible digital
audio programs, such as Cakewalk Pro Audio, Logic Audio, Cubase VST, SAW,
Cool Edit Pro, Sound Forge, Acid, etc.
OASYS PCI also supports ASIO, for use with ASIO-compatible programs including
Cubase VST and Cool Edit Pro. For more information on setting up ASIO, please
see "Configuring ASIO Software," on page 26.
Using the OASYS PCI as multiple wave devices
Through the OASYS PCI's standard wave device driver, you can use the card with
any standard Windows digital audio program. The OASYS PCI appears as six full-
duplex stereo devices, one for each input/output pair, as well as four stereo output-
only devices, for the eight Streams.
Programs which support the use of multiple audio devices have simultaneous
access to all 12 inputs and 20 outputs, up to the limits of the program itself.
The OASYS PCI Wave Device Settings program controls the card's sample rate,
word clock source, and play/record synchronization. Optionally, it also lets you set
volume and balance for each output device. From this program, you can also call
up the Audio Settings, Hardware Meters, and Diagnostics windows.
To set up the OASYS PCI for use with MME audio programs:
1.
2.
3.
This will ensure that all of the input and output pairs are synchronized. In some
special cases, you may wish to disable Auto Sync; for more information, see the
section "Wave Device Settings (Windows)" in the Users Guide.
4.
The OASYS PCI Audio Settings window will appear.
5.
For more information, see the section "ASIO Control Panel/Audio Settings" in the
Users Guide.
6.
For more information, see "Setting the default playback or recording device," on
page 32.
OASYS PCI
Open the OASYS PCI Wave Device Settings program.
Select the desired sample rate and word clock source.
Make sure that the Auto Sync button is on.
Press the Audio Settings button.
Set up input-to-output monitoring as desired, using the channel routing and
volume controls.
Optional: to use the OASYS PCI as the default input and/or output wave
device, use the Multimedia Properties control panel.

Configuring MME (Windows)

31