Hardware Installation - Korg Soundlink DRS OASYS PCI Installation Manual

Hardware Installation

Hardware Installation
Installing the OASYS PCI is simple and straightforward. However, to make sure
that you don't damage the card or the computer, please read the instructions on
pages 8-13 completely before performing the installation. They're short, they're
sweet, and they're even sprinkled with a few zippy graphics–the perfect
accompaniment to a brief coffee break.
Unpacking
The OASYS PCI packages contain the following items:
•
•
•
•
•
•
The package may also contain a bundled software application.
System Requirements
MacOS
To use the OASYS PCI on a MacOS computer, you will need:
•
•
•
•
Third-party digital audio software may have additional requirements; please
consult your manuals for details.
Windows 95/98
To use the OASYS PCI on a Windows 95/98 computer, you will need:
•
•
•
•
8
OASYS PCI audio card (don't remove this from its envelope yet!)
OASYS PCI software CD-ROM
Analog breakout cable
Digital breakout cable
This manual
Warranty card
A Macintosh computer with a PowerPC processor. For use as a standalone
application, Korg recommends a minimum of a 200MHz 604e processor. For
use in conjunction with digital audio software, Korg recommends a
minimum of a 233MHz G3.
MacOS version 8.5.1 or later.
CD-ROM drive for installing software.
A color monitor, with minimum resolution of 1024 x 768.
A Windows 95/98-compatible computer. For use as a standalone application,
Korg recommends a minimum of a 200MHz Pentium II processor. For use in
conjunction with digital audio software, Korg recommends a minimum of a
300MHz Pentium II processor.
Microsoft Windows 95 or Windows 98.
CD-ROM drive for installing software.
A color monitor, with minimum resolution of 1024 x 768.
Installation and Setup
OASYS PCI