Table of Contents
Advertisement
Restarting allows the 1212 I/O extensions to be loaded into the system; the
extensions must be loaded before the card can be used.
11. After successfully re-starting with the 1212 I/O extension loaded, re-
Virus detection software will only interfere the first time that the 1212 I/O
extension loads.
Installing the 1212 I/O software (Windows 95)
The 1212 I/O includes several important pieces of software for
Windows 95-compatible computers. Some of this software is driver
software, which you can just install and forget about, but two programs–
the 1212 I/O Utility, and the 1212 I/O Wave Device Control–allow you to
control various aspects of the 1212 I/O.
The 1212 I/O Utility program offers quick and easy access to the routing
and mixing features of the card. The 1212 I/O Wave Mixer offers various
controls for using the card as multiple Wave devices, including
synchronization of each device for playback and record, and settings for
each device's volume and balance.
The 1212 I/O package includes two floppy disks for Windows 95. The
Windows 95 Drivers disk includes all device driver-related files, including
the 1212 I/O Wave Mixer. The Windows 95 Software disk contains an
installer program, which installs the 1212 I/O Utility program and adds the
1212 I/O software to the Start menu.
To install the 1212 I/O software:
1.
2.
Windows 95 will automatically detect that a new card has been installed,
and the Update Device Driver Wizard will appear.
3.
4.
When the driver installation is complete, Windows 95 will return you to the
desktop. Next, you need to run the Korg 1212 I/O setup, which will install
the 1212 I/O Utility program and add the 1212 I/O software to the Start
menu.
5.
6.
7.
Korg 1212 I/O
enable any installed virus detection extensions.
If you have not done so already, install the 1212 I/O card (see
"Installing the 1212 I/O card in your computer" on page 5, above).
Turn the computer on.
Insert the Korg 1212 I/O Windows 95 Drivers floppy disk into your
computer's floppy disk drive A.
Follow the on-screen instructions to finish the installation of the
1212 I/O driver software.
Eject the Korg 1212 I/O Windows 95 Drivers floppy disk.
Insert the Korg 1212 I/O Windows 95 Software floppy disk.
Press the Start button, and then press Run.
Installation
7
Advertisement
Table of Contents
