Korg Soundlink DRS OASYS PCI Installation Manual page 33

Open architecture synthesis, effects, and audio i/o

Hide thumbs Also See for Soundlink DRS OASYS PCI:

Table of Contents

Installation and Setup

With the OASYS PCI selected in the Sound control panel, the computer will now

use the OASYS PCI for all sound input and output, including alert sounds (the alert

sound is the "beep," or other sound, which plays when software displays a

warning message). To keep extraneous MacOS beeps and chirps out of your digital

audio system, you may wish to turn the alert volume off entirely.

The Sound Manager supports only two inputs and two outputs. Using the OASYS

PCI Sound Manager control panel, you can set the inputs and outputs to use any

two of the OASYS PCI's channels.

10. Press the Options button.

The OASYS PCI Sound Manager control panel will appear.

Sound Manager Control Panel

11. Select the desired OASYS PCI channels in the Input Selection and Output

You can also change these as necessary, whenever you like.

OASYS PCI

Select "Volumes" from the menu.

Set the OASYS PCI's output volume to the maximum value.

Optional: select "Alert Sounds" from the menu, and turn the Alert Sound

volume all the way down.

Select "Sound In" again, from the Sound control panel's menu.

Selection menus.

Configuring Sound Manager (MacOS)

Table of Contents