Korg Soundlink DRS OASYS PCI Installation Manual page 19

Installation and Setup
You must restart in order to use the OASYS PCI software.
12. After successfully re-starting with the OASYS PCI extensions loaded, reset
13. If you will be using the OASYS PCI with a simple serial port MIDI
14. If you will be using the OASYS PCI with OMS-compatible software, see
15. If you will be using the OASYS PCI with FreeMIDI-compatible software,
16. If you will be using the OASYS PCI with ASIO-compatible software, see
Installing the OASYS PCI software for Windows 95/98
The OASYS PCI includes several important pieces of software for Windows 95/98
computers, including low-level drivers, MME drivers, ASIO drivers, MIDI drivers,
the Wave Device Settings program, editing software, synthesizer sounds, and
effects. All of these are included on the CD-ROM shipped with the OASYS PCI.
The instructions below assume that you have already optimized Windows for use
with audio and MIDI programs. If you have not already done so, please see the
OASYS PCI FAQ, along with the documentation for your audio and MIDI
programs.
Installing the OASYS PCI drivers
To install the OASYS PCI drivers:
1.
2.
Windows will automatically detect that a new card has been installed, and the
Update Device Driver Wizard will appear.
3.
4.
5.
6.
When the driver installation is complete, Windows will return you to the desktop.
OASYS PCI
the Extension Manager as desired.
interface, without either OMS or FreeMIDI, see "Serial Port MIDI Setup
(MacOS)," on page 17.
"Configuring OMS (MacOS)," on page 20.
see "Configuring FreeMIDI (MacOS)," on page 23.
"Configuring ASIO Software," on page 26.
If you have not done so already, install the OASYS PCI card (see "Installing
the OASYS PCI card in your computer" on page 9, above).
Turn the computer on.
Insert the Korg OASYS PCI CD-ROM into your computer's CD-ROM drive.
Follow the on-screen instructions to finish the installation of the OASYS
PCI drivers.
When asked to do so, specify that you have the disk provided by the
manufacturer.
When asked to do so, specify the path to the CD-ROM (since the Korg CD-
ROM contains the driver installation file, "oasyspci.inf," along with the
driver files themselves).
Software Installation
15